Struct veloren_network_protocol::Promises

impl Promises

pub const ORDERED: Self = _

this will guarantee that the order of messages which are send on one side, is the same when received on the other.

pub const CONSISTENCY: Self = _

this will guarantee that messages received haven’t been altered by errors, like bit flips, this is done with a checksum.

pub const GUARANTEED_DELIVERY: Self = _

this will guarantee that the other side will receive every message exactly once no messages are dropped

pub const COMPRESSED: Self = _

this will enable the internal compression on this, only useable with #[cfg(feature = “compression”)] Stream

pub const ENCRYPTED: Self = _

this will enable the internal encryption on this Stream

impl Promises

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u8

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u8) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u8) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u8) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl Promises

pub const fn iter(&self) -> Iter<Promises>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<Promises>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

impl Promises

pub const fn to_le_bytes(self) -> [u8; 1]

Trait Implementations§

impl Binary for Promises

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for Promises

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = Promises

The resulting type after applying the & operator.

impl BitAndAssign for Promises

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for Promises

fn bitor(self, other: Promises) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = Promises

The resulting type after applying the | operator.

impl BitOrAssign for Promises

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for Promises

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = Promises

The resulting type after applying the ^ operator.

impl BitXorAssign for Promises

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for Promises

fn clone(&self) -> Promises

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for Promises

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Extend<Promises> for Promises

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements. Read more

impl Flags for Promises

const FLAGS: &'static [Flag<Promises>] = _

The set of defined flags.

type Bits = u8

The underlying bits type.

fn bits(&self) -> u8

Get the underlying bits value. Read more

fn from_bits_retain(bits: u8) -> Promises

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value. Read more

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set. Read more

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values. Read more

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values. Read more

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool
where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool
where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)
where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)
where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!). Read more

fn toggle(&mut self, other: Self)
where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)
where Self: Sized,

Call [Flags::insert] when value is true or [Flags::remove] when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!). Read more

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<Promises> for Promises

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl Hash for Promises

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher. Read more

1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more

impl IntoIterator for Promises

type Item = Promises

The type of the elements being iterated over.

type IntoIter = Iter<Promises>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value. Read more

impl LowerHex for Promises

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for Promises

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = Promises

The resulting type after applying the ! operator.

impl Octal for Promises

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for Promises

fn eq(&self, other: &Promises) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for Promises

type Primitive = u8

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for Promises

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = Promises

The resulting type after applying the - operator.

impl SubAssign for Promises

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for Promises

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl StructuralPartialEq for Promises

Auto Trait Implementations§

impl RefUnwindSafe for Promises

impl Send for Promises

impl Sync for Promises

impl Unpin for Promises

impl UnwindSafe for Promises

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> Pointable for T

const ALIGN: usize = _

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more